电位滴定法测定氟化钠的含量

建立了一种电位滴定法测定氟化钠含量的方法。该方法采用氢氧化钠降解氟硅酸钠与硝酸镧作为滴定剂，以氟离子选择电极为测量电极，测定总氟含量；扣除氟硅酸钠含量，获得氟化钠含量。结果表明，加标回收率范围为99.02%～99.79%,RSD(n=9)为0.24%，样品测定准确度与精密度良好。该方法简化了前处理操作步骤，减少了目视判断终点带来的误差，降低试验过程的毒性，提高了氟化钠含量的检测效率，可作为《HG/T 5210—2017牙膏用氟化钠》补充分析方法。     

Ultralight and robustly compressible silica aerogel enhanced by AC/C sponge with high oil/water separation

Journal of Porous Materials - In recent years, oil spills and industrial organic pollutants have caused irreparable damage to the environment and biological ecosystems. Therefore, the treatment of...     

A comparative study on pyrolysis reactivity and gas release characteristics of biomass and coal using TG-MS analysis

Pyrolysis reactivity and gas release characteristics of biomass and coals were comparatively investigated using TG-MS. In addition, chemical compositions and structures of tested samples were determined to correlate pyrolysis gas release characteristic. It was found that pyrolysis reactivity and gaseous product release were hardly varied with pyrolysis heating rate. Furthermore, pyrolysis rates of two biomass samples were greater than those of coals, which were mainly attributed to the chemical compositions and the gaseous product evolution process. The result also showed that gaseous product release during pyrolysis process was related to the presence of different functional groups in samples.     

红色烟火着色剂MOF[Sr2(DTDA)(H2O)6]n的制备与性能

以富氮羧酸类分子2,2'-(3,3'-偶氮-双(1H-1,2,4-三唑-5基))二乙酸(H2DTDA)与氢氧化锶八水合物为原料,在水热条件下制备了一种金属有机框架(MOF)结构的新型红色烟火着色剂[Sr_2(DTDA)(H_2O)_6]_n(1);采用傅里叶变换红外光谱(FT-IR)、X射线单晶衍射(XRD)、粉末X射线单晶衍射(PXRD)和元素分析等对化合物结构进行了表征;采用热重法(TG)-差示扫描量热法(DSC)、BAM标准法测试了化合物1的热性能和感度性能;设计了烟火剂配方,对化合物1应用于红色烟火着色剂的可行性进行分析。结果表明,化合物1是一种具有二维空间结构的MOF材料,其层状结构之间存在丰富的氢键作用;放大合成的水热实验同样可以得到高纯度的化合物1;撞击感度为80 J,摩擦感度 360 N;化合物1可作为红色着色剂应用于烟火剂配方中。     

Tribological behavior studies of chemically bonded phosphate ceramic coatings reinforced with modified multi-walled carbon nanotubes (MWCNTs)

To improve the wear resistance of the chemically bonded phosphate ceramic coatings, MWCNTs are selected as the reinforcement after the modification. The high temperature wear experiment is carried out to investigate the wear behavior of the coatings with different temperatures. The results suggest that, when the temperature is below 500℃, MWCNTs can decrease friction coefficient, and the lowest friction coefficient is about 0.28, but MWCNTs lose the lubricant function at 500℃ and the friction coefficient keeps at the level of ~ 0.68. In addition, the wear resistance of coatings is improved with the introduction of MWCNTs at 100℃ and 300℃ (the wear rate is below 15X10^-3mm³/Nm), but keeps similar level at 500℃ (the wear rate is ~ 22 × 10⁻³mm³/Nm). Besides, the wear mechanism of the coatings reinforced by MWCNTs is also investigated based on the wear behavior and microstructural characterizations. MWCNTs improve the fracture toughness by preventing the crack generation and forming the bridge when crack occurs, which leads to smooth wear tracks and good wear resistance of coatings. The coatings with MWCNTs achieve poor wear resistance at 500℃ because MWCNTs lose their strength and resistance to fatigue by oxidizing.     

Relay and sequential cropping corn with winter oilseed crops in northern climates

Nutrient Cycling in Agroecosystems - Winter oilseed crops camelina [Camelina sativa (L.) Crantz] and field pennycress (Thlaspi arvense L.) are potential candidates for diversifying the...